How To Build A Retaining Wall On A Slope With Cinder Blocks
Starting at one end of the wall lay out the cinder blocks end to end until you reach the first turn in the wall.
How to build a retaining wall on a slope with cinder blocks. Do you have a slope that you need to retain. Expect to spend 20-36 hours building a 3x10-foot concrete-block retaining wall. This small block retaining wall was built by me in one day.
Hit the block with a rubber mallet to lower any high areas into the sand base. While gathering measurements be sure that you dig your trench one inch deep for every eight inches tall. Building A Cinder Block Retaining Wall On A Slope.
In this video well show you tips and tricks that you need to build a retaining wall that will hold up. Pour a 1-inch layer of sand over the gravel and compact this as well. If your wall is straight line up the first layer of cinder blocks from one end to the other end.
As the last step fill the cores around the rebar with mortar from the bottom to top. Set a level on each block and check for levelness both front to back as well as left to right. Put the Deadmen and Tiebacks in Place.
This is a ten minute how-to build a wall using inexpensive formed concrete blocks. Pour crushed limestone into the trench to create a solid base that will allow water to drain. This should be done at every three blocks or at intervals specified by your local codes.
Of compacted base 1 in. Then a retaining wall estimate can be completed u. Tamp the soil to compact it and provide a firmer base for the retaining wall.