How To Do Landscape Timbers

The first step to installing landscape timbers it to measure.

How to do landscape timbers. Before you head to your nearest Home Depot you have to know how much timber to buyUsing edging stakes and yarn measure out your flower bed gardening path etc. Moisture-free location and paint. Ideal for a variety of applications including decks play sets landscaping and other outdoor projects where lumber is exposed to the elements.

Use a level to check that the timbers sit level. Placing 12-inch spikes in the timbers helps to stabilize them as well. Spikes for Smaller Landscape Timbers.

Dig a trench approximately 3 or 4 inches deep with a shovel. Place the timbers of the first course in the trench and butt the ends together tightly. If you can waterproof the timber all the better.

2 Red Pine Ground Contact Pressure-Treated Timber This Pressure-Treated Timber is treated for This Pressure-Treated Timber is treated for protection against termites and rot. Make sure you hammer the stakes in the ground and tie the yard as tight as possible. Working with landscape timbers can prove to be more than a little challenging for the average Do-It-Yourselfer.

Place the rebar through the holes and then use a sledgehammer to pound it into the ground until it is flush with the top landscape timber. You may need to even out the ground a little with a shovel. One of the greatest things about landscaping timbers is that when used properly they can turn even the ugliest of yards into a work of art.

Pressure-Treated Landscape Timber To extend the timbers useful life span and protect it from the natural elements pressure-treated timber undergoes a process in which a water and preservative-agent solution is applied to the timber under high. How to Keep Landscape Timber from Rotting. Add or remove soil below the timbers to level them as needed.